Nautilus R614 Service Manual page 48

5.
Carefully disconnect the Resistance and Heart Rate
Cables.
6.
bracket arms at the front of the Seat Frame. Using a 6mm
Frame. Remove the Seat Frame Assembly. Set the hardware
and Seat Frame Assembly safely aside.
NOTICE: Do not crimp any cables.This step may require
two people.
7.
Using a #2 Phillips screwdriver, loosen and remove the
screw that secures the front Seat Rail End Cap. Bend the
edges of the rear Seat Rail End Cap to disengage the inside
tabs from the Main Assembly, and remove. Set the hardware
and Caps safely aside for reassembly.
8.
Using a #2 Phillips screwdriver, remove the screws
(indicated) that secure the Left Rear Shroud. Remove the
the Left Shroud. Set the hardware and Left Shroud safely
aside for reassembly.
X4
6mm
X2
4mm
48