Nautilus R614 Service Manual page 35

Hide thumbs Also See for R614:

Table of Contents

Loosen and remove the Pedals. Set them safely aside for

reassembly.

Note: The Left Pedal is reverse-threaded.

Orientation is based from a seated position on the bike. The

Left Pedal has an "L", the Right Pedal an "R".

Twist the Crank Covers toward the back of the machine to disengage

the inner tabs. Carefully remove the Crank Covers and set them safely

aside for reassembly.

Bend the edges of the Top Shroud to disengage the inside tabs from

the Main Assembly, and slide the Top Shroud up the Mast.

Using the 6mm hex key, remove the hardware (indicated) from the

Mast. Gently pull the Mast out and disconnect the cables. Set the hard-

ware, Mast and Console, and Top Shroud safely aside for reassembly.

NOTICE: Do not crimp the cables. This step may require two people.

Note: Do not let the cables fall down inside the Frame.

(R)

(L)

Table of Contents

R616