Attaching The Belt Clip; Turning On The Radio; Adjusting The Volume - Motorola SRX 2200 User Manual

68012005050-FY
Chapter 2: Getting Started
2.6

Attaching the Belt Clip

Procedure:
1. Align the grooves of the belt clip with those of the radio and press upward until you hear a click.
2. To remove the clip, use a flat-bladed object to press the belt clip tab away from the radio.
3. Slide the clip downward and away from the radio to remove the clip.
2.7

Turning On the Radio

Procedure:
1. Rotate the On/Off/Volume Control Knob clockwise until you hear a click.
● If the power-up test is successful, you see a splash screen on the radio display, followed by the
Home screen and the Codeplug Alias.
● If the power-up test is unsuccessful, you see Error XX/YY (XX/YY is an alphanumeric code).
NOTE:
If the radio fails to power-up after repeating a few times, record the Error XX/YY code and
contact your dealer.
Codeplug Alias feature is enabled through Customer Programming Software (CPS)
configuration to display the codeplug alias as a temporary text during power on.
2. To turn off the radio, rotate the On/Off/Volume Control Knob counterclockwise until you hear a click.
2.8

Adjusting the Volume

Procedure:
1. To increase the volume, rotate the On/Off/Volume Control Knob clockwise.
2. To decrease the volume, rotate the knob counterclockwise.
20