68012004058-HV
Chapter 7 : Advanced Features
•
Press the Menu Select button directly below Ok to save the new Friendly Name and return to
the Bluetooth feature screen.
7.23.5
Responder Alert Sensors
Responder alert sensors allow the radio to send an over-the-air (OTA) notification when the radio
receives the holster sensor event.
To enable the feature, ensure that the Global Positioning System (GPS), Enhanced Data, and
Bluetooth feature of your radio is turned on and the radio supports Bluetooth Low Energy (BTLE).
You can disable the feature temporarily or permanently. This feature allows you to prevent one or all
events from being reported OTA.
This feature is enabled through Customer Programming Software (CPS) configuration. For more
information, contact your system administrator.
7.23.5.1
Holster Sensor
Holster sensor monitors the state of the holster and allows the radio to send an Over-The-Air (OTA)
notification whenever a gun or a taser is pulled out of the holster or put in the holster.
7.23.5.2
Low Battery Notification
When the holster or weapon fire sensor battery is below the preset threshold value, the radio displays
<BT alias> low batt and a tone sounds.
7.23.5.3
Disabling the Sensor
This feature disables the sensors temporarily or permanently from sending the sensor events to the
system.
NOTE: The feature is only applicable to holster sensor and weapon fired sensor. Vest pierced
sensor cannot be disabled.
7.23.5.3.1
Disabling the Sensor Temporarily
Procedure:
1 Short-press the preprogrammed Sensor button or the preprogrammed Menu Select button to
activate the sensor timer.
The following scenarios affect the sensor state:
•
If a gun or taser is removed from the holster within the timer duration, the timer stops
and switches the sensor to disabled state. A tone sounds and the radio displays Sensor
Disable.
NOTE: The radio enables the sensor only when all the guns or tasers are placed into
the holster. A tone sounds and the radio displays Sensor On temporarily.
116