Table of Contents
Advertisement
68012005050-FY
Chapter 7: Advanced Features
b. Short press the preprogrammed Record Playback button again to skip to the next saved call. If
there is only a single saved call, the playback skips to the end of the call.
Radio auto playback the most recent incoming call followed by saved calls in chronological order.
Radio displays the playback status.
NOTE:
Received call overwrites the ongoing record playback. User can short press the programmable
button within three seconds to continue the playback and ignore the receiving call.
User can short press the programmable button to trigger playback when the radio is receiving
call to overwrite the receiving call.
Playback can be halted by any tone and button press except for specific buttons. Check with
your dealer or system administrator for more information.
7.7
In-Call User Alert
This feature allows the radio to remain muted to affiliated talkgroup calls or dispatch calls while operating on
the current Trunking Personality or conventional channel respectively.
Group and individual Pages unmute the radio for the alert tone to sound. The radio also unmutes to individual
radio-to-radio calls. This feature is very useful when a radio-user prefers not to hear affiliated talkgroup or
dispatch calls traffic, but needs-to remain in radio contact. For an In-Call User Alert enabled channel, the
Voice Mute button-press or the Voice Mute menu-selection allows the radio-user to toggle on and off Voice
Mute functionality.
7.8
Emergency Operation
The Emergency feature is used to indicate a critical situation. An emergency signal overrides any other
communication over the selected channel.
Your radio supports the following Emergency modes:
●
Emergency Alarm
●
Emergency Call
●
Emergency Alarm with Emergency Call
2
●
Silent Emergency
Alarm
One channel supports only one Emergency mode. The radio responds differently when pressing the
programmed Emergency button in each channel.
Only one Emergency mode can be assigned to the Emergency button.
Your radio is also programmed to operate in one of the following conditions:
Tactical/Non-Revert
The radio sends an emergency alarm and/or makes an emergency call on the current channel.
Non-Tactical/Revert for Conventional System
The radio reverts to the programmed emergency channel to send an alarm and/or make an emergency
call.
2
This feature allows you to send an Emergency Alarm to the system without triggering any audio or visual
indicators.
50
Advertisement
Table of Contents
