Table of Contents
Advertisement
68012005050-FY
Chapter 7: Advanced Features
This capability does not apply to priority channels or the designated transmit channel.
NOTE: Deleting a nuisance channel is only possible through the preprogrammed Nuisance Channel
Delete button.
Procedure:
When the radio is locked onto the channel to be deleted, press the preprogrammed Nuisance Delete
button.
Result: The radio continues scanning the remaining channels in the list.
7.4.4
Restoring a Nuisance Channel
Procedure:
To restore the deleted nuisance channel, perform one of the following actions:
●
Stop and restart a scan.
●
Mode change to another channel and back to the original channel.
●
Turn off the radio and then turn it on again.
7.5
Call Alert Paging
This feature allows your radio to work like a pager.
If other users are away from their radios or if they are unable to hear their radios, you can send them an
individual call alert page. You can also verify if a radio is active on the system.
Depending on how your radio is programmed, if there is no answer after the maximum ring time or when you
press the PTT button for an Enhanced Private Call, the radio automatically sends a call alert page.
NOTE: This feature must be programmed by a qualified radio technician.
7.5.1
Receiving a Call Alert Page
When and where to use: When you receive a Call Alert page, you hear four repeating alert tones and the
LED blinks green. The call received icons blinks and the display shows PAGE RCV.
Procedure:
Press any button to clear the Call Alert page.
Result:
7.5.2
Sending a Call Alert Page
When and where to use:
48
Advertisement
Table of Contents
