2
The radio continues scanning the remaining channels in the
list.
Restoring a Nuisance Channel
Procedure:
To restore the deleted nuisance channel, do one of the
following:
•
Turn the radio off and then turning it on again.
OR
•
Stop and restart a scan via the preprogrammed Scan button
or menu.
OR
•
Change the channel via the MFK.
54
English
Call Alert Paging
This feature allows your radio to work like a pager.
Even if other users are away from their radios, or if they are
unable to hear their radios, you can send them an individual
Call Alert page. You can also verify if a radio is active on the
system.
Depending on how your radio is programmed, when you make
an Enhanced Private Call, the radio either automatically sends
a call alert page if there is no answer after the maximum ring
time, OR when you press the PTT button.
Note:
This feature must be preprogrammed by a qualified
radio technician.
Receiving a Call Alert Page
Procedure:
1
When you receive a Call Alert page, you hear four repeating
alert tones and the LED blinks green.
2
The call received icons blinks and the display shows Page
received.
Press any button to clear the Call Alert page. See Making a
Talkgroup Call on page 37 or Making a Private Call
(Trunking Only) on page 37 for more information on returning
the call.