Connecting To The App; Setting The Temperature - Pit Boss PB1600PSE Manual

The app will allow you to control and monitor your smoker and meat probe temperatures from your mobile device. Enjoy
the benefits that Pit Boss® mobile connectivity has to offer! Follow these instructions on how to connect your unit to
the Pit Boss® Grills App with your Android™ or iOS® device:
1. Download the Pit Boss® Grills App. Open the app and allow Wi-Fi® to be enabled for setup. New users will need to
create an account and follow the prompts to login.
2. If you are within Bluetooth® or Wi-Fi® range (9 m / 30 ft), the Pit Boss® Grills App will automatically detect your unit.
Select your model. If you do not see your unit on the screen, ensure your unit is connected to a power source and is
turned on.
3. Name your model (ie. My Grill) in the app and select "Connect" at the bottom of the screen. This will save your model
in the devices menu.
4. From the devices menu, click the grill model to connect. This will show you the controller screen.
5. Click the settings option (gear) in the top-right corner, enter your Wi-Fi® credentials, then click the check mark at
the bottom of the screen to connect. Now both Bluetooth® and Wi-Fi® (cloud) icons will show on the devices menu,
showing that the grill is connected.
While using the app, the screen will shine bright when the grill is active and connected. If the app screen or grill
goes dark on the devices menu, check your wireless connection or power source.
The Grill Probe measures the internal temperature of the grill. When
the Target temperature is adjusted, the Grill Probe will read the Actual
temperature inside the grill barrel and adjust to the desired Target
temperature. To adjust the desired Target temperature of the grill,
follow the steps below:
1. Press the Controller Knob or touch the Actual Temperature on the
screen. The Target temperature will blink to show it is active. (A)
2. Turn the Controller Knob to change the Target temperature value
to your desired temperature. Once the desired Target temperature
is reached, lock it in by pressing the Controller Knob or touching
the Actual Temperature. (B)
A meat probes measures the internal temperature of the meat on the grill, similar to your indoor oven. Insert the
stainless-steel meat probe into the thickest portion of the meat. The internal temperature of the meat is shown on the
display screen. Plug-in the Meat Probe adapter to the meat probe connection port and ensure it is inserted all the way
into the plug. You will feel and hear it snap in place.
IMPORTANT: When placing the meat probe into your meat, ensure the meat probe and meat probe wires avoid
direct contact with flame or excess heat. This can result in damage to your meat probe. Run the excess wire out
the rear exhaust holes of the Main Barrel, the top of the Main Barrel (near the grill lid hinge), or through the
front hole near the hopper. When not in use, disconnect from the meat probe connection port, and place in the
holes on the hopper handle to keep protected and clean.
PIT BOSS® GRILLS

CONNECTING TO THE APP

SETTING THE TEMPERATURE

USING A MEAT PROBE
10
B
A
WWW.PITBOSS-GRILLS.COM