Creality K1C User Manual page 28

6. Tips and Routine Maintenance
① Together with the flexible platform after the printed
model has been cooled down Remove from the device
and partially bend the platform slightly to separate the
model from the platform.(No excessive bending of the
platform to prevent it from being deformed and unusable)
6.2.3 Cleaning of debris inside the chassis
② The residue of the platform filaments
canbe scraped off with a blade. Be cautious
of safety when using.
Reminder: Since the printing platform is quick-wear, it is recommended to replace the
printing platform regularly to ensure that the first layer of the model is adhered.
01 25
③ When the first layer of the model is not
glued, it is recommended to apply glue stick
evenly on the surface of the platform.