Console Redirection Settings - DFI ADS310-R680E/Q670E User Manual

Chapter 3
BIOS SETTINGS
Advanced
X
Serial Port Console Redirection

► Console Redirection Settings

Configure the serial settings of the current COM port.
Terminal Type
Select terminal type: VT100, VT100+, VT-UTF8 or ANSI.
Bits per second
Select serial port transmission speed: 9600, 19200, 38400, 57600 or 115200.
Data Bits
Select data bits: 7 bits or 8 bits.
Parity
Select parity bits: None, Even, Odd, Mark or Space.
Stop Bits
Select stop bits: 1 bit or 2 bits.
Flow Control
Select flow control type: None or Hardware RTS/CTS. Flow Control is for RS485 mode and is
only supported by Serial Port 1 (COM1).
VT-UTF8 Combo Key Support
Enable VT-UTF8 Combination Key Support for ANSI/VT100 terminals.
Recorder Mode
With this mode enbaled only text will be sent. This is to capture Terminal data.
Resolution 100x31
Enables or disables extended terminal resolution
Putty KeyPad
Select FunctionKey and KeyPad on Putty.
User's Manual | ADS310-R680E/Q670E 42