Programming The Memory Feature; Linking And Unlinking The Key Fob; To Memory; Memory Position Recall - Jeep GRAND CHEROKEE 4xe 2023 Owner's Manual

56 GETTING TO KNOW YOUR VEHICLE
P T M
ROGRAMMING HE EMORY
To create a new memory profile, perform the
following:
NOTE:
Saving a new memory profile will erase the
selected profile from memory.
1. Place the vehicle's ignition in the ON/RUN
position (do not start the engine).
2. Adjust all memory profile settings to desired
preferences (i.e., seat, side mirror, power tilt/
telescopic steering column [if equipped], and
radio station presets).
3. Push and release the set (S) button on the
memory switch.
4. Within five seconds, push and release either of
the memory buttons (1) or (2). The instrument
cluster display will indicate which memory
position has been set.
NOTE:
Memory profiles can be set without the vehicle in
PARK, but the vehicle must be below 5 mph (8 km/h)
to recall a memory profile.
F L A
EATURE INKING ND
T M
O EMORY
Your key fobs can be programmed to recall one of
two saved driver's side memory profiles.
NOTE:
Before programming your key fobs you must select
the "Personal Settings Linked To Key Fob" feature
through the Uconnect Settings Ú page 214.
To program your key fobs, perform the following:
1. Place the vehicle's ignition in the OFF
position.
2. Select a desired driver's side memory profile,
1 or 2.
3. Once the profile has been recalled, push and
release the set (S) button on the memory
switch.
4. Within five seconds, push and release button
(1) or (2) accordingly. "Memory Profile Set"
(1 or 2) will display in the instrument cluster.
5. Push and release the lock button on the key
fob within 10 seconds.
U T K F
NLINKING HE EY OB
NOTE:
Your key fobs can be unlinked from your driver's
side memory settings by pushing the set (S) button,
and within 10 seconds, pushing the unlock button
on the key fob.
M P R
EMORY OSITION ECALL
NOTE:
Memory Recall is available when not in PARK, if the
vehicle speed is below 5 mph (8 km/h).
To recall a memory settings profile using the

memory switches, push memory button (1) or
(2) on the memory switch.
To recall the driver's side memory settings using

the key fob, push the unlock button on the key
fob linked to memory position 1 or 2.
A recall can be canceled by pushing any of the
memory buttons during a recall (S, 1, or 2), or by
pushing any of the seat adjustment switches.
When a recall is canceled, the seat and power tilt/
telescopic steering column (if equipped) will stop
moving. A delay of one second will occur before
another recall can be selected.