Jeep GRAND CHEROKEE 4xe 2023 Owner's Manual page 330

Table of Contents

Advertisement

328
IN CASE OF EMERGENCY
3. For the front axle, place the jack on the body
flange just behind the front tire as indicated by
the triangular lift point symbol on the sill
molding. Do not raise the vehicle until you are
sure the jack is fully engaged.
Front Lifting Point
NOTE:
The jack must be placed straight on with handle
facing outwards.
Front Jacking Location
4. For a rear tire, place the jack in the slot on the
rear tie-down bracket, just forward of the rear
tire (as indicated by the triangular lift point
symbol on the sill molding). Do not raise the
vehicle until you are sure the jack is fully
engaged.
CAUTION!
Do NOT raise the vehicle by the body side sill
molding. Be sure the jack is placed in the proper
engagement location on the inside of the panel.
Damage of the vehicle may occur if the
procedure is not properly followed.
Rear Lifting Point
Rear Jacking Location

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents