Table of Contents
Advertisement
The Vehicle Security system is designed to protect
your vehicle. However, you can create conditions
where the system will give you a false alarm. If one
of the previously described arming sequences has
occurred, the Vehicle Security system will arm
regardless of whether you are in the vehicle or not.
If you remain in the vehicle and open a door, the
alarm will sound. If this occurs, disarm the Vehicle
Security system.
If the Vehicle Security system is armed and the
battery becomes disconnected, the Vehicle
Security system will remain armed when the
battery is reconnected; the exterior lights will flash,
and the horn will sound. If this occurs, disarm the
Vehicle Security system.
R
O
T
S
EARMING
F
HE
YSTEM
If something triggers the alarm and no action is
taken to disarm it, the Vehicle Security system
will turn the horn off after a 29 second cycle
(with five seconds between cycles and up to
eight cycles if the trigger remains active) and
then rearm itself.
S
S
M
ECURITY
YSTEM
ANUAL
The Vehicle Security system will not arm if you lock
the doors using the emergency lock lever
Ú page 48.
DELUXE VEHICLE SECURITY SYSTEM —
IF EQUIPPED
The Deluxe Vehicle Security system monitors the
doors, hood latch, and liftgate for unauthorized
entry and the ignition switch for unauthorized
operation. The system also includes a dual
function intrusion sensor and vehicle tilt sensor.
The intrusion sensor monitors the vehicle interior
for motion. The vehicle tilt sensor monitors the
vehicle for any tilting actions (tow away, tire
removal, ferry transport, etc.).
If a perimeter violation triggers the security system,
the horn will sound for 29 seconds and the exterior
lights will flash followed by approximately five
seconds of no activity. This will continue for eight
cycles if no action is taken to disarm the system.
T
A
T
O
RM
HE
Follow these steps to arm the security system:
1. If any doors, windows, or the sunroof (if
equipped) are open, close them.
2. Make sure the vehicle ignition system is OFF.
O
VERRIDE
S
YSTEM
GETTING TO KNOW YOUR VEHICLE
3. Perform one of the following methods to lock
the vehicle:
Push lock on the interior power door lock
switch with the driver and/or passenger
door open.
Push the lock button on the exterior Passive
Entry door handle with a key fob available in
the same exterior zone Ú page 50.
Push the lock button on the key fob.
NOTE:
When armed, the interior motion sensor
detects movement within the vehicle's interior,
including moving objects (i.e. people and pets)
and air currents through open windows or the
sunroof. The windows and sunroof should be
closed, and moving objects should not be left in
the vehicle when the intrusion detection is
armed, otherwise false alarms can occur.
Once the security system is armed, it remains in
that state until you disarm it by following either
of the disarming procedures described. If a
power loss occurs after arming the system, you
must disarm the system after restoring power to
prevent alarm activation.
47
2
Hide quick links:
Advertisement
Table of Contents
