Jeep GRAND CHEROKEE 4xe 2023 Owner's Manual page 37

Table of Contents

Advertisement

The state of charge indicator provides a visual
indication of the high voltage battery's charge
status during charging. It also indicates a charging
problem as well as waiting for a scheduled charge
to begin.
NOTE:
The goal post means there is a fault in the
charging system.
The blinking lights give the status of the charge.
The lights scroll one at a time when the vehicle
is plugged in outside of its charging schedule
time/day of the week, and it is waiting on the
schedule to begin charging.
In extreme hot or cold environments, the lights on
the state of charge indicator may not illuminate.
Charge status is available in the instrument cluster
display. In the event of an error in the charging
process, the outer two lights will blink.
When the hood is open, the lights on the state of
charge indicator will not be illuminated.
Number Of Indicator
Percent Of Battery
Lights Illuminated
Charge
1st light blinks
0 – 20%
1st light on,
21 – 40%
2nd light blinks
1st and 2nd lights on,
41 – 60%
3rd light blinks
Number Of Indicator
Percent Of Battery
Lights Illuminated
Charge
1st, 2nd, and
3rd lights on,
61 – 80%
4th light blinks
1st, 2nd, 3rd, and
4th lights on,
81 – 99%
5th light blinks
All five lights on
Two outer lights
Indicates an error in the
are blinking
charging process
Lights turn on one at a
Indicates system is
time from left to right
waiting for scheduled
(when looking at the
time in charge schedule
front of the vehicle)
to begin charging
All lights turn on, then
Indicates a
immediately turn off
successful plug-in
NOTE:
For each segment of lights illuminated indicating
the percent of battery charge, two different
blink rates are used. A blink rate of 1 second
on/1 second off indicates that the first half is
charging. The blink rate will increase to 0.5 second
on/0.5 second off to indicate that the second
half is charging. When the battery is fully charged,
GETTING TO KNOW YOUR VEHICLE
the blinking stops and the lights remain illumi-
nated as charging continues.
Next to the charging inlet, there is an LED that
changes color based on charging status.
100%
Charging Inlet LED Location
LED Light Color
Blue
Flashing Green
Solid Green
Blinking Red
35
LED Charging Inlet
Status
Indicates that the system
is waiting for a
scheduled recharge.
Charging process in place.
Indicates the vehicle is
fully charged.
Indicates a fault in the
charging system.
2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents