Jeep GRAND CHEROKEE 4xe 2023 Owner's Manual page 312

310 SAFETY
6. Test that the child restraint is installed tightly
by pulling back and forth on the child seat at
the belt path. It should not move more than
25 mm in any direction.
WARNING!
Improper installation of a child restraint to the

ISOFIX anchorages can lead to failure of the
restraint. The child could be badly injured or
killed. Follow the child restraint manufac-
turer's directions exactly when installing an
infant or child restraint.
Child restraint anchorages are designed to

withstand only those loads imposed by
correctly-fitted child restraints. Under no
circumstances are they to be used for adult
seat belts, harnesses, or for attaching other
items or equipment to the vehicle.
Install the child restraint system when the

vehicle is stationary. The ISOFIX child restraint
system is correctly fixed to the brackets when
you hear the click.
Installing Child Restraints Using The Top
Tether Anchorage
1. Look behind the seating position where you
plan to install the child restraint to find the
tether anchorage. If the seat can be moved,
you may need to move the seat forward to
provide better access to the tether
anchorage. If there is no top tether anchorage
for that seating position, move the child
restraint to another position in the vehicle if
one is available.
2. Route the tether strap to provide the most
direct path for the strap between the anchor
and the child seat. If your vehicle is equipped
with adjustable rear head restraints, raise the
head restraint, and where possible, route the
tether strap under the head restraint and
between the two posts. If not possible, lower
the head restraint and pass the tether strap
around the outboard side of the head restraint.
3. Attach the tether strap hook of the child
restraint to the top tether anchorage as shown
in the diagram
4. Remove slack in the tether strap according to
the child restraint manufacturer's instructions.
Second Row Bench Seat Top Tether Strap Mounting
(5 Passenger Seating)