Placing Wire-Feed Unit On Power Source; General - Fronius VR 4000 Operating Instructions Manual

Placing wire-feed unit on power source

General

The wire-feed units can be placed on the power source if a swivel pin holder is
available, e.g.:
-
-
-
More detailed information on the swivel pin receptors can be found in the "Swivel
pin receptors for upright consoles" and "PickUp" operating instructions.
General
Danger from falling wire-feed unit.
Check that the wirefeeder is securely placed on the swivel pin.
1
2
28
"PickUp" swivel pin receptor, for use with the "PickUp" trolley
"narrow" swivel pin receptor, for use with an upright console
"wide" swivel pin receptor, for use with two screwed upright consoles and two
power sources
CAUTION!