Advertisement
N O T E
The mounting holes are threaded to accept M8-32 screws which may
not extend more than 114 inch into the STU-IIIIR chassis.
The STU-III/R may also be mounted by removing the four corner
screws on the top or bottom cover and using the resulting holes for
mounting. All removed screws must be replaced with #6-32 screws
which may not extend more than 1/4 inch into the chassis.
0 2 5 0 3 3
STU-III/R Mounting Hole Locations
Figure 4-2.
4 - 4
Advertisement
Chapters
