Assembly Of Display And Keypad Board - Motorola i425e Detailed Service Manual

PREPARING FOR FIELD LEVEL TESTING: Assembly of Display and Keypad Board

2.7.5 Assembly of Display and Keypad Board

1. Insert the display flex into Ziff connector on Main Board.
2. Lock the Ziff connector by closing the hinge door.
3. Using a pair of tweezers, apply the Kapton tape to the 21 pin ZIF connector.
4. Using a pair of tweezers, remove the spacer adhesive liner on the main board
5. Connect the PTT flex to the keypad board.
6. Assemble the keypad board to the main board.
Note: Verify that the main board and keypad board are connected properly
1
4
5
60
Tools Required
Tweezers
2
3
6
6880401P26-O