Table of Contents
Advertisement
2.5.3 Keypad Board and Popple Installation
Equipment& Tool: Main Keypad Press Fixture # 130-1069
Inspect the keypad for print quality; ensure there are no defects
1. Check the placement of the 4 contact fingers for proper placement Check for the Kapton tape.
2. Apply Mylar Popple Assembly and Black tape onto keypad board.
3. Align the rubber keypad and keypad board into the fixture, then press it ( Press time is 5 seconds)
1
4 fingers contact
Kapton Tape
3
Avoid causing damage to battery contacts and RF contact
6880401P26-O
PREPARING FOR FIELD LEVEL TESTING: Keypad Board and Popple Installation
Mylar Popple
Black Tape
2
47
Advertisement
Table of Contents
