Table of Contents
Advertisement
12.3 Parameter level
Fig. 21 - Parameter level
The parameters Pb2, Cy2, HyS2 refer to second controller output for a 3-state controller.
The decimal place of some parameters depends on the decimal place setting in the displays
→ The parameter display on the instrument depends on the selected controller type.
(see Jumo manual Chapter 8.2 "Controller" (Cntr))
[MBA_UB-1...4-CT_3.1_EN] Rev.: 02/2022 Translation of the original instructions
No liability accepted for translation or printing errors. Subject to changes in dimensions, weights and other technical data.
All rights reserved. Modifications, reprints and photomechanical reproduction, even in extract from, require the express perm ission of BOGA GmbH, Werkstraße 16, D-59494 Soest.
23
Advertisement
Table of Contents
