The electric connections of the humidifier are found on the side of the housing. Confusion is prevented by
form-coded plugs.
Fig. 14 - Electric connection
11.1 Control connection
The 15-pole D-SUB connector must be used for the control signals for operating the humidi-fier.
18
No liability accepted for translation or printing errors. Subject to changes in dimensions, weights and other technical data.
All rights reserved. Modifications, reprints and photomechanical reproduction, even in extract from, require the express permission of BOGA GmbH, Werkstraße 16, D-59494 Soest.
Fig. 15 - 15-pole D-SUB connector
Control signals
see wiring diagram
Power supply
230 V / 50 Hz
[MBA_UB-1...4-CT_3.1_EN] Rev.: 02/2022 Translation of the original instructions