Table of Contents
Advertisement
12. Operation
12.1 Setting of set point
The set point is set at the operating display of the continuous controller CT1.
The desired set point is entered by pressing the up and down keys.
Display actual value
Display set point
12.2 Level concept
The parameters for device setting are organised at different levels.
Fig. 20 - Configuration level
Time-Out: If no button is pressed for 180 seconds, the unit will return to the normal display!
22
No liability accepted for translation or printing errors. Subject to changes in dimensions, weights and other technical data.
All rights reserved. Modifications, reprints and photomechanical reproduction, even in extract from, require the express permission of BOGA GmbH, Werkstraße 16, D-59494 Soest.
Fig. 19 - Continuous controller CT1
[MBA_UB-1...4-CT_3.1_EN] Rev.: 02/2022 Translation of the original instructions
Advertisement
Table of Contents
