Aerosol Pipes; Joined Aerosol Outlets - Boga AIRWIN UB-1 4/CT/3.1 Series Installation And Operating Instructions Manual

9.2

Aerosol pipes

The aerosols may also be distributed without an aerosol jet. The transport of the aerosols is then done
only via pipes or tubes directly to the place of humidification. This place may be in a different room,
even in an aggressive environment.
Place of humidification
9.3

Joined aerosol outlets

[MBA_UB-1...4-CT_3.1_EN] Rev.: 02/2022 Translation of the original instructions
No liability accepted for translation or printing errors. Subject to changes in dimensions, weights and other technical data.
All rights reserved. Modifications, reprints and photomechanical reproduction, even in extract from, require the express perm ission of BOGA GmbH, Werkstraße 16, D-59494 Soest.
Fig. 7 - UB-4/CT/3.1 with pipes for aerosol transport
The pipes or tubes must be placed in such a way that the return of the condensate
is always possible along the entire pipe / tube length. It must be ensured that the
flow resistances of the individual exhaust systems are all the same.
Fig. 8 - UB-4/CT/3.1 with joined aerosol outlets
Merging the aerosol outlets may result in a loss of power due to condensation.
15