Table of Contents
Advertisement
Fixed Spot Thermometer
Fig. 6-3
User Guide
RLY1 and RLY2 are alarm contact outputs.
EMin is Emissivity input setting 0-20mA current
input for 0.1 to 1.0 Emissivity.
mA out terminals are for the 4-20mA current
output temperature measurement signal.
24Vdc are the power input terminals.
CMDin and Com are used if you want to send
a contact close command to trigger a customer
selected feature, like peak picker discharge.
LSRin and Com are used if you want an external
contact close input to activate the alignment laser
for installation use.
series
6 - 5
Advertisement
Table of Contents
