Ametek LAND IQ Series User Manual page 21

Fixed Spot Thermometer
Item Description
11 User Calibration
12 Laser
13 Read/Apply
14 Obscuration
Drive Mode (used
only when SNR
connected)
IMPORTANT: Please note radiation safety warning, where this symbol
appears
User Guide
User set? Function
Yes For advanced users wanting to make
a single-point adjustment to match
the thermometer reading with a local
temperature reference measurement.
WARNING - Changing this figure from
the default (1000) temporarily changes
the calibration of the instrument's
temperature output, indicated by a red
LED. Refer to Appendix D.
Class 2 laser product - Do not stare into beam
Observe precautions for working with Class 2
lasers
Activate - switches on the built-
Yes
in laser, which can be used to align
the thermometer accurately. An LED
illuminates when the laser is active
Apply - applies any changes made to the
Yes
thermometer
Read - reads and displays the parameters
set in the thermometer
Yes Up Scale - drives the output upscale if
the target is excessively obscured.
Down Scale - drives the output upscale
if the target is excessively obscured.
LASER RADIATION
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
1mW MAX OUTPUT AT 650nm
IEC 60825-1:2007
series
5 - 10