Laser Alignment - Ametek LAND IQ Series User Manual

series
4
IQ Series thermometers are fitted with a laser alignment utility, which can be
used to align the thermometer accurately on the required target.
When the laser is activated, a laser beam is emitted from the lens in the front
of the IQ Series thermometer. The laser beam defines the centre line of the
thermometer field of view. For details of the target size at a particular point in
the field of view, refer to the target size table for your thermometer.
4 - 1

LASER ALIGNMENT

Warning
CLASS 2 Laser Product.
DO NOT stare into laser beam (1.0 mW maximum output at
650 nm).
DO NOT look directly towards the thermometer window, or into the
laser beam during operation.
If the laser is projected onto a highly reflective surface, DO NOT
look at the laser stripe from a position where a direct ('mirror-
like') reflection may enter the eye.
Warning
CLASS 2 Laser Product.
DO NOT attempt to disassemble the laser unit or any of its
mounting components.
Fixed Spot Thermometer
User Guide