Table of Contents
Advertisement
series
Item Description
1
File
2
Thermometer
3
Comms
4
Live Data
5 - 7
User set?
Function
Yes
New - resets to a default configuration
setting
Open - opens a saved configuration file
Save - saves the current configuration
file. Note: selecting Save when running
from the default configuration i.e. Default.
snt (Item 15) will create a new default
configuration, which will be applied when
the configurator is next opened.
Save As - saves the current configuration
file with a new file name
Exit - closes the IQ Series Configurator
Apply - applies any changes made to the
Yes
thermometer
Read - reads and displays the parameters
set in the thermometer
485 Settings - displays and allows
Yes
changes to be made to the RS485
settings. Serial Port, Baud Rate and
Address (see Fig. 5-3). Note that this
menu only sets the baud rate of the
configurator, not the thermometer.
Note: the factory default baud rate
setting is 57600 for both the software and
for all IQ Series thermometers.
No
Continuously updated information,
including target temperature instrument
Label, Internal Ambient Temperature,
selected Time Function and Alarms status
Fig. 5-3 '485 Settings' sub-menu
Fixed Spot Thermometer
User Guide
Advertisement
Table of Contents
