Using The Accessories - AEG BCK456220B User Manual

How to set: Minute Minder
Step 2
, - press to set the time.
The function starts automatically after 5 sec.
When the set time ends, the signal sounds.
Step 3 Press any button to stop the signal.
Step 4 Turn the knobs to the off position.
How to cancel: Clock functions
Step 1
- press repeatedly until the clock function symbol starts to flash.
Step 2
Press and hold:
The clock function turns off after few seconds.

8. USING THE ACCESSORIES

WARNING!
Refer to Safety chapters.
8.1 Food Sensor
Food Sensor - measures the temperature
inside the food. When the food is at the set
temperature, the oven turns off.
Set 2 temperatures:
• the oven temperature: minimum 120 °C,
• the food core temperature.
For the best cooking results:
• Ingredients should be at the room
temperature.
• Food Sensor - do not use it with liquid
dishes.
• Food Sensor - during cooking it must
remain in the dish.
Food categories: meat, poultry and
fish
1. Insert the tip of the core temperature
sensor into the centre of meat or fish, in
the thickest part if possible. Make sure
that at least 3/4 of the core temperature
sensor is inside of the dish.
2. Put the plug of the core temperature
sensor into the socket located in the front
frame of the appliance.
.
The indicator for the core temperature sensor
flashes.
3. Press the button
temperature. You can set the temperature
from 30 °C to 99 °C.
4. Set the oven function and temperature.
When the dish is at the set core temperature,
an acoustic signal sounds for 2 minutes.
Press any button to stop the signal.
5. Deactivate the appliance.
6. Remove the plug of the core temperature
sensor from the socket. Remove the dish
from the appliance.
If the dish is not cooked to your satisfaction,
do the above steps again and set a higher
core temperature.
or to set the core
ENGLISH 47