Electrical Characteristics; Electrical Connections - Broaster E Series Installation Manual

ELECTRICAL CHARACTERISTICS

The Model 18G is available for 120VAC
applied voltage, 15 amp, 60Hz, 1 phase
electrical connection in the USA and
120VAC or 200 - 240 VAC applied voltage,
15 amp, 50/60Hz, 1 phase electrical con-
nection for export applications.
> When installed, the unit must be elec-
trically grounded in accordance with
local codes, or in the absence of local
codes, with the National Electrical Code,
ANSI/NFPA 70, or the Canadian Electri-
cal Code, CSA C22.2, as applicable.
4-2
broaster.com Manual #21307 09/20 Rev 09/20

ELECTRICAL CONNECTIONS

> Applied voltage should match data-
plate listed voltage.
Electrical Grounding
Instructions - The Model
18G is equipped with a three-prong
(grounding) plug for your protection
against shock hazard and should be
plugged directly into a properly
grounded three-prong receptacle. DO
NOT cut or remove grounding prong
from this plug.