Advertisement
Safety Precautions
Read entire section before starting installation.
Warning!
Electric Shock can kill – Only qualified personnel should perform this installation. Turn off input power at
the fuse box before working on this equipment. Do not touch electrically live parts. Always connect the
machine to an earthed mains supply as per national recommended standards.
Select suitable location
Place the welder where clean cooling air can freely circulate in and out of the front & rear louvre vents.
Dirt, dust or any foreign material that can be drawn through vents into welder must be kept to a mini-
mum. Failure to observe these precautions can result in excessive operating temperatures which can lead
to plant failure.
Grinding
Do not direct grinding particles towards the welder.
An abundance of conductive material can cause plant failure.
Transport & unloading
Never underestimate the weight of equipment, never move or leave suspended in the air above people.
Use recommended lifting/handling equipment at all times.
6
Advertisement
