Advertisement
MIG Operation - manual mode
Once you have selected required MIG mode you will see a screen as below.
This is the MIG manual screen.
Use the middle knob to cycle through settings, when a setting is highlighted in red, use the left control
knob to change setting.
Wire feed speed
Welding voltage
2/4T Trigger operation
Spool gun on/off
Spot welding on/off
Once you have selected the required base options, you can then move to advanced settings screen by
highlighting the icon below and pushing in middle knob.
Spool gun operation
When using the spool on gun, the control knob on the gun controls the wire feed speed.
20
Advertisement
