Advertisement
DC TACK/SPOT Mode cont..
SPOT welding allows you to product one single spot weld for a selected time when trigger is pressed.
You can also set a stitch time which will then set a delay time after first spot and then another spot weld
will be started and this will be repeated for as long as trigger is pressed.
This is setup in same way as tack weld screen, however spot time is between 0.1s and 10s and the stitch
time is 0 - 5s.
Once you have set the SPOT settings, you return to main TIG screen by turning middle knob to highlight
the following icon in RED, then pressing in middle knob. There you can adjust the amperage etc.
27
Advertisement
