Advertisement
Selecting EASY SET STICK MMA parameters
Use the middle control knob to move between each setting - once setting is highlighted in RED
turn left control knob to adjust.
Once you have entered all 3 parameters for weld the recommended welding amperage will be shown. To
trim amperage turn middle knob so amperage is in RED , use left knob to adjust trim.
You can trim + / - 10 amps to suit you personal preference of travel speed / weld bead characteristics.
1. ELECTRODE TYPE
DC - 6011, 6013, 7014, 7018
2. ELECTRODE SIZE
2.4mm, 3.2mm, 4.0mm - Note: Rods shown depending on machine maximum amperage.
3. MATERIAL THICKNESS
1.5mm, 2.0mm up to 8mm depending on machine maximum amperage and electrode type/size.
30
Advertisement
