Prepare Air Conditioner For Installation; Prepare Window For Installation; Position Air Conditioner - Whirlpool W7WCC065XB Use And Care Manual

Prepare Air Conditioner for Installation

Install Side Curtains
NOTE: Attach curtains to the air conditioner before placing the air
conditioner in window.
1. Place the tabbed side of the side curtain in the track on the
right-hand side of the air conditioner cabinet.
A
A. Tabbed side of side curtain
B. Curtain frame
2. Slide the side curtain down the track until the curtain is
aligned with the top and bottom of the air conditioner cabinet.
3. Slide the side curtain frame into the top channel on the top of
the air conditioner and the track on the bottom of the air
conditioner.
4. Repeat the previous steps for the left-hand side curtain and
frame.
10
1. Measure the width of the window opening.
2. Mark the center line on the inside windowsill.
3. Attach the foam seal with adhesive strip to the bottom of the
B
NOTES:

Prepare Window for Installation

A
B
A. Width of window opening
B. Center line
upper window.

Position Air Conditioner

WARNING
Excessive Weight Hazard
Use two or more people to move and install
air conditioner.
Failure to do so can result in back or other injury.
Handle the air conditioner gently.
Be sure your air conditioner does not fall out of the opening
during installation or removal.
The place where the power cord exits the air conditioner
should be no more than 6 ft (183 cm) from a grounded outlet.
Do not block the air intake or discharge louvers in the front
panel.
Do not block the louvers on the outside of the air conditioner.