Prepare Air Conditioner For Installation - Whirlpool ROOM AIR CONDITIONER Use & Care Manual

Install Side Curtains
NOTE: Attach curtains to the air conditioner before placing the air
conditioner in window.
1. Locate provided bag of screws.
2. Insert top and then bottom of right-hand curtain housing in
top and bottom curtain channels on air conditioner.
Back View
A
A. Curtain housing
B. Curtain top channel on air conditioner
Attach Adhesive Seal
1. Cut the adhesive seal to the width of the lower window sash.
2. Remove the backing from the seal and attach the seal to the
bottom of the lower window sash.
6

Prepare Air Conditioner for Installation

Bottom View
B
3. Extend right-hand curtain outward so you may insert a ³⁄₈"
4. While the right-hand curtain is still extended, insert ³⁄₈" screws
5. Slide the curtain housing into the channels as far as it will go.
6. Repeat above steps for the left-hand curtain.
Prepare Window for Installation
1. Measure the width of the window opening and mark the
A
A. Curtain housing
B. Curtain bottom channel on air conditioner
screw through the top hole in the curtain. Using a ³⁄₈" screw,
screw curtain to the top hole in the air conditioner cabinet.
NOTE: This screw is required to correctly attach curtain (top
to bottom) to the air conditioner cabinet.
through the other three holes in the curtain. Screw curtain to
all four holes in the air conditioner cabinet.
Install L Brackets
center line on the outside windowsill.
A
B
A. Width of window opening
B. Center line
B