Confirmation For Nfc Tag Communication - Toshiba MMY-MUP0721FT6P-UL Service Manual

For example; How to prohibit Test operation from WTA (If you need)
Steps
1 Change rotary switch position for Outdoor DN code setting
2 Push SW04 for activate DN code
3 Change DN code Number to "dn.005" with SW05 or SW06
Change data value display with SW04
*"d.⌴⌴⌴0" shows validness of TEST operation by WTA App., (Because
4
PWR ON within 48h).
Change value to "d.⌴⌴⌴1" with SW05 or SW06
5
*"d.⌴⌴⌴1" shows prohibition of TEST operation by WTA App.,
Push SW04 more than 2sec.
6
7-seg display will change from flashing to lighting.
7 Return to default Rotary switch position.
8 Turn ON/OFF outdoor unit main power supplies. Keep turn off time 60 seconds or more.
* Do it again if the 7-segment display is different from the above.
* The functions other than the test operation of this Application can work normally even if the test operation
function are prohibited.

7-8-4. Confirmation for NFC tag Communication

When you cannot read out the information of the NFC tag with your smartphone, preform the following step.
Rotary switch
Step
SW01 SW02 SW03
1 2 16 14
2 1 1 1
If above check is no problem, refer to User Guide of Wave Tool Advance.
Trademark
Android is a trademark or registered trademark of Google LLC.
IOS is trademark or registered trademark of Cisco in the U.S.and other countries and is used under license.
QR Code is a trademark or registered trademark of DENSO WAVE Inc.
Items
Push switch
7-segment
display
SW04 SW05 SW06
nFc.
nFc.Er
— — —
U ∗ ---
Rotary switch
SW01 SW02 SW03
9 1
9 1
9 1
9 1
9 1
9 1
1 1
Check result
Normal
NFC tag wiring trouble
Check NFC tag wiring
(Return to Rotary switch)
- 194 -
Push SW 7-segment
SW04 SW05 SW06
1 - - -
1 Push - -
1 - Push Push
1 Push - -
1 - Push Push
Push
Flashing-->
more
1 - -
than 2
sec
1 - - -
display
dn.SEt
dn.001
dn.005
d. 0
⌴⌴⌴
d. 1
⌴⌴⌴
d.⌴⌴⌴1
Lighting
U * ---