Toshiba MMY-MUP0721FT6P-UL Service Manual page 97

CODE No.(DN) setting
■ Wired remote controller
(RBC-AWSU**)
Perform the advanced settings for the air conditioner.
Carry out the setting operation while the indoor unit is stopped.(Turn off the
air conditioning unit before starting the setting operation.)
Display example of
AWSU52*
1
Push the [ Menu] button to display the menu screen.
2
Push and hold the [
button at the same time to display the "Field setting menu".
Push and hold the buttons for more than 4 seconds.
3
Push the [ ] / [
on the "Field setting menu" screen,then push the
" Set" [ Set / Fix] button.
The fan and louver of the Indoor unit operate.When the group control is used,the
fan and louver of the selected Indoor unit operate.
4
Move the cursor to select "DN code" with the "
then set "0004" with the [
5
Move the cursor to select "data" with the "
then set "0001" with the [
button.
0004
6
Push the [ Menu] button to set the other DN codes, then
"Continue?" is displyaed on the screen.
7
Push the " No" [
setting operation."
then the screen returns to the "Field setting menu" screen.
Pushing the " No" [
when the group control is used. Push the [
selection screen to finish the setting operaion "
8
Push the [ Return] button to return.
Field setting menu (2/3)
6.Setting louver position
7.Setting timer operation mode
8.Easy I.DN setting
9.DN Setting
10.Reset Power Consumption data
Menu] button and the [
] button to select "9.DN setting"
] / [ ] button.
" button,
] / [ ]
0004
Return] button to finish the
" appears on the screen for a while,
Return] button displays the unit selection screen
Return] button on the unit
" appears on the screen for a
]
" button,
0001
- 97 -