Whyte KYNAMIC Quick Start Manual page 37

08 Battery
8.1 Technical Data
Storage Conditions
Where possible, store the eBike battery in a dry, well-ventilated place. Protect
it against moisture and water. When the weather conditions are bad, it is
advisable to remove the eBike battery from the eBike and store it in a closed
room, for example, until you use it next.
Do not store the eBike battery in the following locations:
– In areas without smoke alarms
– Near combustible or easily flammable objects
– Near heat sources
– In locked vehicles (especially in the summer)
– In direct sunlight
To ensure an optimum service life, store eBike batteries at room temperature.
Never store them at temperatures below −20 °C or above 60 °C.
Make sure that the maximum storage temperature is not exceeded.
Maintenance and Cleaning
PLEASE NOTE: The eBike battery must not be submerged in water or
cleaned using a jet of water.
Keep the eBike battery clean and avoid contact with skincare products, sun
cream and insect repellent. Clean it carefully with a soft, damp cloth. Clean
and lightly grease the connector pins occasionally. Use medical or technical
Vaseline for this purpose. Please contact an authorised bicycle retailer if the
eBike battery is no longer working. Whyte does not recommend removing the
battery from the bike unless you are a skilled bike mechanic. Speak to your
Whyte retailer for further advice.
WARNING - In the event of a battery fault the eBike battery must
not be opened, not even for repairs. There is a risk of the eBike
battery catching fire, e.g. as a result of a short circuit. This risk
continues to apply for any Kynamic eBike battery that has ever been
opened, even at a later point in time.
Do not have your eBike battery repaired; instead, have your bicycle
retailer replace it with an original Kynamic eBike battery of the
correct system generation.
Intube Battery KY-BC250
37