Safety Equipment - Whyte KYNAMIC Quick Start Manual

Table of Contents

Advertisement

03 - RIDE INFO

2.3 Safety Equipment

INFO The user of this Whyte bike is responsible for understanding
current laws and regulations regarding bicycle use. The rider must
obey regulations and must be aware of the penalties for their
violation.
WARNING! Safety gear such as helmets may be required by law.
Please educate yourself on current laws and legislations before
riding. The use of helmets and other protective wear can reduce
serious injuries and even death.
WARNING! When using pannier racks, pay attention to the
maximum loading weight. The rack will have the max. weight
stamped into the metal work or on a visible label. Ensure the rack's
fixings are checked and tightened regularly.
Lights: Lights are mandatory for night riding by law, reflectors are not
sufficient. Please make yourself aware of all laws and regulations for your
country/state. Riding at night or in poor visibility is dangerous. Ensure lights
are installed at the front and rear of your bicycle before riding at night.
Helmet: Whyte Bikes strongly recommend that when riding any of their
bikes, that a helmet is worn at all times. This is regardless of the discipline or
bicycle type. Ensure the helmet is securely fastened. Failure to wear a helmet
could result in serious injury or even death.
Reflectors: The reflectors on your bicycle reflect light, which illuminates them,
making the cyclist visible to other vehicles, pedestrians and cyclists. They
make you visible in conditions of poor visibility/light. They are therefore a
crucial part of the safety system and must not be removed.
Please ensure all reflectors are securely fastened, clean, clear of any
obstructions and exhibit no signs of damage. Do not remove reflectors from
your Whyte bike, they have been installed to meet current laws and are fitted
for the users safety.
12

Advertisement

Table of Contents
loading

Table of Contents