Table of Contents
Advertisement
05 HMI BAR MOUNT
CAUTION - Before your ride:
• Regardless of your experience level, you should read the User
Manual carefully and carry out all important safety checks.
• The eBike system can only operate when the battery is sufficiently
charged.
Product Features
All illustrations of bike parts except for the drive unit, on-board computer
(including operating unit), speed sensor and the corresponding holders are a
schematic representation and may differ on your eBike. The numbering of the
components shown refers to the illustrations on the graphics to the right.
Operation Requirements
Your eBike system can only be activated when the following
requirements are met:
– A sufficiently charged battery is inserted (see battery operating instructions).
– The speed sensor is connected (see drive unit operating instructions).
Power On/Off
Press and hold the power button (1) to turn on/off.
Start up logo will be displayed for 3 seconds after initiating power to the
controller. Then the home screen will be displayed.
Dropper Post Lever
(Not fitted to all bike
specifications)
5.1 On/Off
HMI control unit
1
20
Advertisement
Table of Contents
