Whyte KYNAMIC Quick Start Manual page 31

06 HMI INTEGRATED
Battery Power Indicator
Battery power information is displayed at the top left of the HMI screen . The
battery icon is divided into 5 bars indicating the State of Charge (SOC) value.
During start up the battery icon will be flashing whilst a connection is
established. Once connected, the flashing will stop and the corresponding
bars will show the SOC value.
When the SOC value is lower than 6%, the battery icon will show zero battery
capacity and continually flash.
PLEASE NOTE:
When there is a communication error between HMI and battery:
• No SOC value information will be shown
• Range information will not be displayed
Error Information
The HMI screen will warn the user when there is a fault. When a fault is
detected, 'ERROR' will be flash at the top of the screen. When screen displays
'ERROR', control functions will not be affected. Normal functions can still be
performed.
If there are no commands are made within 5 seconds, the HMI screen will
return to the 'ERROR' warning. Please see the error code information table for
further details.
Error Codes
Please refer back to pages 25 & 26.
6.4 Charge Level & Errors
BATTERY POWER
ERROR INFO
31