Table of Contents
Advertisement
How to configure it?
C
Connection
Charge Point is delivered with default network setting of "DHCP enabled".
It means that the charge station will try to obtain an IP address from a
DHCP server available on the network.
Connecting a PC directly with the Charge Point needs to be done with
static IP address. The PC and the Charge Point must be in the same
network and in the same range.
In order to change the IP of the Charge Point, use "IP Setup".
•
Enter the MAC of the device
Follow the image below to locate the MAC:
19
Advertisement
Table of Contents
Need help?
Do you have a question about the eVolve Smart Series and is the answer not in the manual?
Questions and answers