Labomed PRIMA DNT Trainer User Manual page 8

Requirement for operation
Installation of the instrument must only be carried out by an authorized LABOMED agent or representative.
Please make sure that the following requirements for operation remain ful lled in the future:
- All mechanical connections(details in the user's manual) which are relevant to safety and properly
connected and screw connections tightened.
- All cable and plugs are in good working condition.
- The voltage setting on the instruments conforms to the rated voltage of the line supply on site.
- The power cord being used in the one designed for use with this instrument
Before every use after re-equipping the instrument
• Make sure that all "Requirement for operation" are ful lled.
• Go through the checklist
• Re- attach or close any covers, panels or caps which have been removed or opened.
• Pay special attention to warning symbols on the instrument (triangular warning signs with exclamation
marks), labels and any parts such as screws or surfaces painted red).
For every use of the instrument
• Avoid looking directly into the light source, e.g. into the microscope objective lens or a light Guide.
• All light radiation have an e ect on skin and biological tissues. For your own protection and advices to keep
the light level to the absolute minimum required for your procedure.
Warning!
Only the right con guration of LABOMED Prima DNT Trainer surgical microscope must be used for related
procedure.
4
6167500-795 PRIMA DNT Trainer
PRIMA DNT Trainer
Issue 1.0
Printed on May,2013