Champion 100304 Operator's Manual page 19

100304 - 22-kW HOME STANDBY GENERATOR WITH AXIS CONTROLLER
aXis CONTROLLER STATUS ICONS
®
The status icons are located at the top of the aXis Controller
Utility Pole
The utility pole icon will indicate utility is the source of power.
Transfer Power Direction
Shows the direction of power
House
Icon for house receiving power
HSB
The HSB icon will indicate power when the generator is the source
of power
®
aXis CONTROLLER
. The information icons are located at the bottom right side of aXis
®
Controller icon touch pad.
®
Hour Meter
The hour meter keeps track of all running time of the HSB. This
includes run time during a utility power outage and during the
weekly exercise cycle. This provides the owner with a record
of operating time which is useful in keeping track of scheduled
maintenance intervals. Refer to the scheduled maintenance chart.
The hour meter can't be reset. The initial time registered on the
meter when first started up (installed) will reflect the factory test
time, this is a normal industry standard. The hour meter only
reflects hours, it does not reflect RPMs or any other function.
Exercise Icon
The BLUE icons will be lit when the HSB is performing the exercise
period. Refer to "Setting Exercise Time" to establish the weekly
exercise period. When the exercise period is complete the icon will
turn off and the HSB will resume its standby monitoring. The aXis
Controller must be in the AUTO mode in order to exercise.
®
19
GENERAL INfORMATION
INfORMATION ICONS
®