Scheduling Log Reports - Watchguard Firebox X1000 User Manual

over by time interval, number of entries, or both. From the
WatchGuard Security Event Processor interface:
1
Click the Log Files tab.
The Log Files tab information appears, as shown in the following
figure.
2
For a time interval, select the Roll Log Files By Time
Interval checkbox. Select the frequency. Use the Next
Log Roll is Scheduled For drop-down list to select a
date. Use the scroll control or enter the first time of day.
3
For a record size, select the Roll Log Files By Number
of Entries checkbox. Use the scroll control or enter a
number of log record entries.
The Approximate Size field changes to display the approximate
file size of the final log file. For a detailed description of each
control, right-click it, and then select What's This?. You can also
refer to the "Field Definitions" chapter in the Reference Guide.
4 Click OK.
The WSEP interface closes and saves your entries. New settings
take effect immediately.

Scheduling log reports

You can use the WSEP application to schedule the auto-
matic generation of network activity reports. For more
information, see "Scheduling a report" on page 245.
User Guide
Setting Global Logging and Notification Preferences
213