Watchguard Firebox X1000 User Manual page 191

2
To add a new group, click the Add button beneath the
Groups list.
The Add Firebox Group dialog box appears.
3
Type the name of the group. Click OK.
4 To add a new user, click the Add button beneath the
Users list.
The Setup Firebox User dialog box appears, as shown in the
following figure.
5
Enter the username and password.
6 To add the user to a group, select the group name in the
Not Member Of list. Click the left-pointing arrow to
move the name to the Member Of list.
User Guide
Defining Firebox Users and Groups for Authentication
169