Watchguard Firebox X1000 User Manual page 238

Chapter 12: Setting Up Logging and Notification
Send Notification
The remaining controls are active when you select the
Send Notification checkbox:
Email
Pager
Popup Window
Custom Program
WatchGuard allows only one notification type per event.
216
there may be a time lag before logs appear in the
log file. All denied packets are logged by default.
Select this checkbox to enable notification for the
event type; clear it to disable notification for the
event type.
Sends an email message when the event occurs. Set
the email recipient in the Notification tab of the
WSEP user interface.
Triggers an electronic page when the event occurs.
Set the pager number in the Notification tab of the
WSEP user interface.
If the pager is accessible by email, select the Email
option, and then enter the email address of the
pager in the Notification tab of the WSEP user
interface.
Makes a pop-up window appear on the log host
when the event occurs.
Triggers execution of a custom program when the
event occurs. A custom batch file or program
enables you to trigger multiple types of
notification. Type the full path to the program in
the accompanying field, or use Browse to locate
and select the program.
N
OTE
WatchGuard Firebox System