Chapter 10: Creating Aliases and Implementing Authentication
3
Enter the IP address of the SecurID server.
4
Enter or verify the port number used for SecurID
authentication.
The default is 1645.
5
Enter the value of the secret shared between the
Firebox and the SecurID server.
The shared secret is case-sensitive and must be identical on the
Firebox and the SecurID server.
6
If you are using a backup server, select the Specify
backup SecurID server checkbox. Enter the IP address
and port number for the backup server.
7
Click OK.
To set up the RADIUS server, see "To configure the
RADIUS server" on page 173.
176
WatchGuard Firebox System