Enabling Protocol Anomaly Detection For Smtp - Watchguard Firebox X1000 User Manual

Enabling protocol anomaly detection for
SMTP
For a description of protocol anomaly detection, see "Pro-
tocol Anomaly Detection" on page 136.
1
From the SMTP Properties dialog box, click the
Properties tab.
The SMTP Properties dialog box appears, as shown in the
following figure.
2
Select the Enable auto-blocking of sites using
protocol anomaly detection checkbox.
3
To set rules for anomaly detection, click the Auto-
blocking Rules button.
The PAD Rules for SMTP Proxy dialog box appears, as shown in
the following figure.
User Guide
Configuring an SMTP Proxy Service
145