Safety; General; Introduction - SANY STG190C-8S Safety, Operation And Maintenance Manual

STG190C-8S Motor Grader

2.Safety

2.1 General

2.1.1 Introduction

This Safety, Operation and Maintenance Manual is a guide for you to operate your equipment
properly.
It contains technical and safety information necessary for operation of your equipment. Read and
understand each section of the manual.
Always operate your equipment according to national, provincial, prefectural and municipal laws
and regulations. The safety information for operation in this manual are just suggestive.
Sany can not anticipate every possible circumstance that might involve a potential hazard during
operation and maintenance. The Safety messages in this manual and on the product are, there-
fore, not all inclusive. If a procedure, work method or operating technique that is not specifically
recommended in this manual is used, you must be sure that it is safe for you and for others. You
should also ensure that the product will not be damaged or be made unsafe by the operation, lubri-
cation, maintenance or repair procedures that you choose.
Equipments covered by this manual are used for various operations under normal conditions.
Never use the equipment in flammable or explosive environment, or in areas containing asbestos
dust.
Select a Sany grader with a configuration suitable for high-plateau operation when operating in
areas 2000 meters above the sea level.
The information, specifications, and illustrations in this publication are on the basis of information
that was available at the time that the publication was written. Sany reserves the right to change
these information at any time without prior notice. Consult Sany dealer to obtain the latest informa-
tion or if you have any question on the information provided in this manual.
Before starting operation and maintenance,
operator and maintainer shall observe the fol-
lowing items.
•
Read and understand the whole manual.
•
Read and understand the safety notices
contained in this manual and the safety
messages on the equipment.
•
Never apply or operate your equipment
under any circumstances in a manner that
is prohibited in this manual.
Safety, Operation and Maintenance Manual-March 2021
Fig 2-1
Safety
2-3